© Corroventa Ltd.
2020.04
16 (17)
Accessories and consumables
The following parts are available as accessories and consumables for K5 HP PX:
Part number
Designation
01100
Hygrostat HS1-5 (5m cable)
1003146
Condensation water filter
1002827
Process air filter
Fault tracing
Fault symptom
Probable cause
Actions
The capacity of the dryer
seems to be low
Low ambient temperature or
low relative air humidity.
The air flow is heavily reduced
because of dirty filter.
If the dehumidifier is used with
a hygrostat, this may be
incorrect or incorrectly set to
too high a relative humidity.
The machine has, during the
time it was installed, stopped
on numerous occasions
because of either too high or
low ambient temperature. If
this is the case it is also
reflected in the energy
consumption, which does not
seem to correspond to
continuous operation during
the time the machine was
installed.
Check relative air humidity.
Increase the temperature in
the area.
Replace the filter.
Check the external hygrostat
function by raising and
lowering its setpoint and note
that the machine switches off
and on.
Ensure that the temperature is
kept within the machine's
operating range, +9 °C to +38
°C, and note that the capacity
increases with increasing
temperature.
