Wavecard-Waveport User Manual
Coronis Systems
1.1 Scope of this document
The purpose of this document is to present:
•
A low-level description of the exchange protocol used to drive the Wavecard wireless board
through an asynchronous serial RS232 (±12V) or TTL level (0-3V) interface
•
The Wavecard electrical interface
•
The Wavecard mechanical interface
1.1.1 Terms
This document provides specifications for using supplied Wavenis DLLs for Windows as well as for writing
your own. This allows you to use Wavecard as a wireless modem that can be integrated into existing
modules or driven by a specific host module with its own micro-controller.
As mentioned above, this document is valid for both Wavecard and Waveport products. The main difference
is that Waveport is a ready-to-use Wavenis network interface for PCs with USB, serial, or compact flash (type
II) connectors.
In this documentation,
host
refers to the module or subsystem that drives the Wavecard;
radio board
indicates Wavecard equipment.
1.1.2 Usage scenarios
Use Waveport to establish Wavenis connections from your PC.
Integrate Wavecard into your own projects or prototypes.
CS-SUP-MUTI-WPORTAPP-E04
7
