corob EVOFLX-LW, User Manual

Page: 33 / 45

- 31 -
COROB EVOFLX-LW
Should growths form in the cap, in the sponges or in the humidifier water bottle, it is advisable to use the following
fluids:
• Propylene glycol solution, 50% by volume, in water;
• AgCl solution in water;
• Bleach (dilution 1%).
8.4 External cleaning
In case of paint spills, clean the machine immediately.
1. Disconnect power supply (chapter 6.7).
2. Clean coverings, panels and control devices of the machine, to remove dirt, dust and any colorant stains, using a
soft and dry cloth, or slightly moistened with a mild cleansing solution.
3. Connect power supply and switch on the machine (chapter 6.6).
See the manufacturer manual for instructions on cleaning the computer .
8.5 Cleaning the nozzle center (humidifier cap)
1. Open the humidifier cap.
2. Disconnect power supply (chapter 6.7) .
3. Accurately clean the nozzles using a sharp tool; remove any dried colorant residue delicately, to avoid damaging
the ends of the circuits.
4. Connect power supply and switch on the machine (chapter 6.6) .
5. Close the humidifier cap .
6. Carry out purge using the command in the management software.
WARNING
NEVER USE WATER OR SOLVENT-BASED CLEANING PRODUCTS TO CLEAN THE MACHINE.
In case the colorant has poured inside the machine
,
do not try to clean; turn the machine off at once and
contact an authorized service center
.