CTB5DSTWHBLE
2
Rev. 7/20/18
CTB5DSTWHBLE
5 Drawer Pro Series Slide Top
Service Cart w/ Power Strip -
White w/ Blue Drawer Pull
Mounting Slots
HARDWARE SPECIFICATIONS
TROUBLESHOOTING
Problem:
Drawers appear not to fit, do not slide in accurately and
bump the cart sides.
Solution:
The roller bearing slides must be fully engaged into the
mounting slots on all drawers. They potentially could fall out of posi-
tion during shipment. Check the side of the cart to determine which
slide is out of position.
Remove the drawer that is out of position. The drawer is removed
by the two clips on the actual roller bearing slide.
Simply push the roller bearing slide back down into position.
Insert the drawer back onto the roller bearing slides.
Problem:
Back Lock/Unlock Switch does not engage
the drawer.
Solution:
The inside Lock/Unlock slide potentially could fall
out of its groove during shipment. Unscrew the four screws that are
holding the Lock/Unlock slide in place.
Once the screws are removed, simply place the latch back onto the
slide and tighten the four screws back down.
1 x 4 pcs.
Flat washer
2 x 4 pcs.
Nylon nut
3 x 4 pcs.
M8 bolt (6mm-19mm)
