Page of 43
22
2.2.4.5
You can adjust other parameters:
2.2.4.5.1 Press the MULTI-FUNCTION
ADJUSTMENT/SELECTION KNOB. Wire Speed will no
longer be highlighted, but will have a box around it. Turn
the MULTI-FUNCTION ADJUSTMENT/SELECTION
KNOB to go through other options. Press the
MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB
to adjust the highlighted Option.
2.2.5
MIG Manual
– Choose this option if you prefer to make all settings manually.
2.2.5.1
This machine is now set to weld.
2.2.5.1.1 Use the MULTI-FUNCTION ADJUSTMENT/SELECTION
KNOB to fine tune wire feed speed.
2.2.5.1.2 Use the VOLTAGE CONTROL KNOB to fine turn
voltage.
2.2.5.2
You can adjust other parameters:
2.2.5.2.1 Press the MULTI-FUNCTION
ADJUSTMENT/SELECTION KNOB. Wire Speed will no
longer be highlighted, but will have a box around it. Turn
the MULTI-FUNCTION ADJUSTMENT/SELECTION
KNOB to go through other options. Press the
MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB
to adjust the highlighted Option.
2.2.6
Saving A MIG Program:
2.2.6.1
Your MIG welding programs can be saved and called up at a later
time.
2.2.6.1.1 Test your welding parameters to make certain you wish
to save this set-up
2.2.6.1.2 Press the MULTI-FUNCTION
ADJUSTMENT/SELECTION KNOB to deselect the wire
speed feed parameter adjustments
2.2.6.1.3 Turn the MULTI-FUNCTION
ADJUSTMENT/SELECTION KNOB until you get to
MEMORY SAVE.
2.2.6.1.4 Press the MULTI-FUNCTION
ADJUSTMENT/SELECTION KNOB to access the
MEMORY SAVE.
2.2.6.1.5 Turn the MULTI-FUNCTION
ADJUSTMENT/SELECTION KNOB to choose the file
number you wish to use to save this set-up. Press the
MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB
to confirm. Press the MULTI-FUNCTION
ADJUSTMENT/SELECTION KNOB again to confirm.
2.2.6.1.6 Press the START/HOME BUTTON to exit.
2.2.7
Recalling A MIG Program
2.2.7.1 Go through the MIG welding set up steps above.
2.2.7.2
You can now recall previous parameters saved.
