CTB-MM700BR / CTB-MM700BK / CTB-MM700BL
CTB-MM700NY / CTB-MM700RG / CTB-MM700RD
2
Rev. 07/24/07
CTB-MM700BR, Bk, BL, NY, RG, RD
7 Drawer Pro Series Service Cart
Mounting Slots
HARDWARE SPECIFICATIONS
4 pcs.
4 pcs.
4 pcs.
TROUBLESHOOTING
Troubleshooting Points for the CTBMM700 Series:
Problem:
Drawers appear not to fit, do not slide in accurately
and bump the cart sides.
Solution:
The roller bearing slides must be fully engaged into
the mounting slots on all drawers. They potentially could fall
out of position during shipment. Check the side of the cart to
determine which slide is out of position.
Remove the drawer that is out of position. The drawer is
removed by the two clips on the actual roller bearing slide.
Simply push the roller bearing slide back down into position.
Insert the drawer back onto the roller bearing slides.
SERVICE CART WEIGHT CAPACITY
Total Net Load. . . . . . . . . . . . . . . . . . . . . . . . 700 LBS
Top Compartment . . . . . . . . . . . . . . . . . . . . .150 LBS
Top Six Drawers . . . . . . . . . . . . . . . . . . 70 LBS each
Bottom Drawer. . . . . . . . . . . . . . . . . . . . . . . 150 LBS
PLEASE NOTE:
Loading cart beyond rated
capacity may cause structural damage to the cart
as well as personal and /or property damage.
Problem:
Back Lock/Unlock Switch does not engage
the drawer.
Solution:
The inside Lock/Unlock slide potentially could fall
out of its groove during shipment. Unscrew the four screws
that are holding the Lock/Unlock slide in place.
Once the screws are removed, simply place the latch back
onto the slide and tighten the four screws back down.
