background image

CSEES1KM 2  03/30/20

             

 

IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING

BEFORE USING THIS DEVICE, READ THIS MANUAL COMPLETELY AND THOROUGHLY, UNDERSTAND ITS OPERATING 
PROCEDURES, SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS.

It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsibility of the 
device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost or 
not legible, contact Cornwell for replacements. If the operator is not fluent in English, the product and safety instructions shall be read to 
and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making sure that the operator 
comprehends its contents.

THE NATURE OF HAZARDOUS SITUATIONS

The use of portable automotive supporting devices are subject to certain hazards that cannot be prevented by mechanical means,  
but only by the exercise of intelligence, care, and common sense. It is therefore essential to have owners and personnel involved in the 
use and operation of the equipment who are careful, competent, trained, and qualified in the safe operation of the equipment and its 
proper use. Examples of hazards are dropping, tipping or slipping of loads caused primarily by improperly securing loads, overloading,  
off-centered loads, use on other than hard level surfaces, and using equipment for a purpose for which it was not designed.

METHODS TO AVOID HAZARDOUS SITUATIONS

•  Read, study, understand and follow all instructions before operating this device.
•  Inspect the engine stand before each use. Do not use if damaged, altered, modified, in poor condition, or has loose or missing  
  components. Take corrective action before using the engine stand.
•  Wear eye protection that meets ANSI Z87.1 and OSHA standards, users and bystanders.
•  Do not use beyond rated capacity.
•  Use only on a hard level surface capable of supporting the load.
•  Make sure all mounting hardware is securely tightened and setup is stable before rotating engine.
•  Always use high strength SAE Grade 8 bolts for mounting engine to mounting head fingers.
•  Make sure widest set of mounting head fingers are nearest the ground when mounting engine to stand.
•  Assure the load is centered, balanced and secured to the mounting head and fingers.  The engine's weight should be balanced within  
  1" of the mounting head's rotational axis.
•  Adequately support the vehicle before starting repairs.
•  Never loosen mounting head bolts or engine mounting bolts unless engine is supported by a crane or hoist.
•  Only attachments and/or adapters supplied by Cornwell shall be used.
•  Do not use stand or dolly to transport engine.
• 

Do not crawl under engine or place any part of your body under engine at any time.

•  Refer to engine manufacturer's service manual for proper lifting points, mounting points and bolt sizes. Mounting bolts should be  
  tightened to the required torque amount to maintain load.
•  Do not use (or modify) this product for any other purpose than that for which it was designed without consulting the manufacturer's  
  authorized representative.
•  Failure to heed these warnings may result in serious or fatal personal injury and/or property damage.

WARNING:

 This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and 

birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

 

CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS

Failure to read this manual completely and thoroughly, understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS, 
MAINTENANCE INSTRUCTIONS and not comply with them, and neglecting the METHODS TO AVOID HAZARDOUS SITUATIONS  
could cause accidents resulting in serious or fatal personal injury and/or property damage.

This is the safety alert symbol. It is used to alert you 
to potential personal injury hazards. Obey all safety 
messages that follow this symbol to avoid possible 
injury or death.

WARNING:

 Indicates a hazardous situation 

which, if not avoided, could result in death 
or serious injury.

WARNING

WARNING

WARNING

WARNING

WARNING INFORMATION

CSEES1KM 

750 LB.  

ENGINE STAND

Summary of Contents for CSEES1KM






Reviews: