8
3.2 Contents of the box
[1x] Corning® Matribot® Bioprinter
Electrical supply box contains:
[1x] 24V Power supply
[1x] Power cord, V-lock, EU, 2m
[1x] Power cord, V-lock, US, 2m
[1x] USB Cable A Male to B Male 1.83m
[1x] SD card, 32GB, SDHC
[1x] Standard nozzle thermal insulator
[1x] 384-well microplate nozzle thermal insulator
[1x] Surface probe
[1x] Toolkit for Preventive Maintenance
Consumables box contains:
[10x] 2.7 mL syringes with Corning Start Sacrificial Ink (non-sterile)
[5x] 3 mL syringes, sterile
[1x] High precision conical bioprinting nozzles, 22G (non-sterile), 50 pcs
[1x] High precision conical bioprinting nozzles, 25G (non-sterile), 50 pcs
[1x] High precision conical bioprinting nozzles, 27G (non-sterile), 50 pcs
[1x] Petri dish
3.3 Setting up the Corning Matribot Bioprinter
Before connecting the Corning Matribot Bioprinter to a wall socket, ensure that the socket is grounded. Next, connect the Corning
Matribot Bioprinter power outlet (see Section 2.1 Product map) to the grounded wall socket with the included 24V power supply and the
power cord.
Turn on the Corning Matribot Bioprinter by using the power switch on the front (see Section 2.1 Product map).
Always connect the Corning Matribot Bioprinter to a grounded outlet. Connecting the instrument to an ungrounded outlet can
cause equipment damage and personal injury.
3.4 Starting the Corning Matribot Bioprinter for the first time
The following steps should be followed the first time the Corning Matribot Bioprinter is used, as well as every time it is moved from one
place of operation to another.
• Level the printbed using the screws below it according to the instructions in Section 6.3.
• Set up the bioprinting or droplet dispensing process according to the instructions in Section 4.
