2
3.0 INSTRUCTIONS FOR USE
1. POWER
switch – to turn the shaker
ON
(power switch illuminates) or
OFF
2. SPEED
potentiometer – to set the shaker speed
3. TIME
potentiometer – to set timed operation
4. HOLD
– yellow light illuminates when shaker is set on HOLD for continuous operation
5. START/STOP
button to start or stop shaking
6. RUN
– green light illuminates when shaker operates
Note: The speed can be adjusted at any time during shaker operation. The time however can not be
changed while the shaker is in motion. To change the time press the STOP button first, allow the shaker
platform to come to full stop and set the time value again. Restart the shaker.
Do not use the shaker near water sources. Be sure that water doesn’t get on the device, especially
during the cleaning procedures.
• Do not expose the shaker to caustic or corrosive vapors (e.g. organic solvents).
• Do not insert any objects into the shaker (such as a screwdriver or metal rods).
• Never operate the shaker without platform securely attached.
• Hazardous samples should be shaken only in appropriate containment vessels.
NOTE :
Misuse or unauthorized modifications will waive the warranty rights. If the equipment is used in a manner
not specified by the manufacturer, the safety features of the shaker may be impaired.
Do not shake flammable or explosive samples!
