manualshive.com logo in svg

CORNING EDGE Splice Cassette, Manual

Share
Download
CORNING EDGE Splice Cassette Manual Download Page 7

STANDARD RECOMMENDED PROCEDURE 000-274 | ISSUE 4 | AUgUST 2016 | PAgE 7 OF 7

Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA

 

800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm

Corning Optical Communications reserves the right to improve, enhance, and modify the features and specifications of Corning Optical Communications products 

without prior notification. A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks. All other 

trademarks are the properties of their respective owners. Corning Optical Communications is ISO 9001 certified. © 2013-2016 Corning Optical Communications. 

All rights reserved.

8.  Secure the Housing

Step 1: 

Close the rear door and ensure the latches are engaged.

Step 2: 

From the front of the housing, open the door and pull the housing trays out to ensure 

adequate fiber slack has been provided to allow the trays to move easily without 

pulling the cable subunits.

Step 3: 

Close the front door and ensure it is securely latched.

Step 4: 

If not already installed in frame, mount the housing into the frame per the instructions 

provided with the housing.

Summary of Contents for EDGE Splice Cassette








Reviews:

No comments

Brands by name

Popular brands

Load more brands