GENERAL
ENGLISH
SAFETY
ATTENTION: Any person handling or using this table must
follow the instructions opposite and read this notice.
y
The person in charge of assembling and using this table must
ensure that the recommendations for use given in this notice
are seen by all users. In communal use, it is strongly
recommended that the instructions and diagrams are displayed.
y
Only use this table after is has been fully assembled, and after checking that the
safety systems are working properly.
y
Users must report any defects and faults in the safety systems, and Immediately
replace faulty parts and not use the table until it has been fully repaired.
y
Assembly, positioning and storage must be carried out by an
adult or under the direct supervision and responsibility of an
adult. Do not leave children unattended around the table. By
their very nature, children love playing and if they use the table
tennis table for other purposes, they may put themselves in
danger or unforeseeable situations. The manufacturer will not
be liabile for any injury caused through misuse of the table.
Thank you for choosing a Cornilleau Table Tennis Table, and we would like to give
you some advice for the best use of your table. Prior to assembly or use, please
read these instructions carefully.
TECHNICAL CHARACTERISTICS
B
Indoor tabletop: 25 mm chipboard tabletop (does not withstand humidity) with steel
frame height 70 mm.
B
Integrated double security: Automatic double locking of table in use and storage
position, pre-locking of each of these positions, unlocking by a centralised control
under each tabletop.
B
Compact technology: In storage position, the height is limited to 1.58 m, the
tabletops are coupled and the centre of gravity is very low.
STANDARD
This table conforms to the following standards:
B
EN NORM 14468-1
GAME
Manuals on how to play table tennis as a sport are available from bookshops.
ASSEMBLY
The table must be assembled by at least
2 adults
following the numerical order of the assembly instructions
.
Before assembling, please check that all the correct
parts are
contained in the package. The quantities indicated make it possible to go through the operations necessary for each assembly stage. Use the tools recommended on page 9.
IMPORTANT: It is essential to remove and dispose
of the pins that hold the bolts at the time of assembly (Assembly stage no. 5).
PRECAUTIONS
INDOOR OR OUTDOOR
Only OUTDOOR tables will withstand outside climatic conditions (rain, humidity, frost, sun, etc.). Even with a cover, INDOOR tables can be damaged if
used or stored outside.
Do not sit or stand on the table,
because of the risk of collapse.
Wind may make the table tip over,
damage it or, more seriously,
cause personal injury. Take the
necessary precautions.
Risk of pinching whilst handling.
Do not use the crossbeam or legs
as support when pulling the release
handle, because of the risk of
tipping over.
It is recommended that you use our
protective cover, which will provide
additional safety for your children.
On uneven surfaces, one or more
legs may not rest on the ground. It
is recommended that the table is
moved to a more level surface or
else wedge the legs.
For models with these options, do
not leave balls and bats in the
appropriate racks when the table
remains outside.
Moving the table on a sloping
surface may cause the table to tip
over, damage it or, more seriously,
lead to injury. Take the necessary
precautions.
HANDLING
TO LOWER THE LEAVES
1) Lift the red handle to release; maintain this action whilst the leaf is being lowered.
2) Lower the leaf down to the game position. Do not allow it to fall, as this might damage your table.
3) For improved safety and greater playing convenience, check that the second locking level is engaged. Failing
this, raise the tabletop from each side of the net.
TO LIFT THE TABLETOPS
1) Pull the red handle under the tabletop to release; maintain this action whilst the tabletop is being lifted.
2) Lift the tabletop up to its storage position.
3) For your safety, check that the tabletop is properly locked.
AFTER-SALES
Keep these instructions and refer to them during maintenance operations and when ordering spare parts from the parts list on the last page. To facilitate processing of orders
for spare parts, indicate the type of table and the
series number
to be found on the underside of the tabletop in the top left hand corner. For maintenance on the game
surface, do not use aggressive products (abrasives, solvents or acids); we recommend our
regenerative cleaner
.
WARRANTY
All tables manufactured by us come with a 2-YEAR warranty as from the date of purchase.
On resin tabletops for outdoor tables (Outdoor), the warranty is extended to 5 YEARS against deformation, separation and erasing of white lines. The warranty is limited to
defective parts acknowledged as faulty by ourselves. and does not apply to damage caused by:
For indoor and outdoor tables
: Assembly not conforming to these instructions, not complying with the instructions for use and safety, normal wear of parts, lack of
maintenance, use of aggressive products, use of aggressive products for maintenance, wind causing the table to fall in the storage position, freewheeling or return to game
position and, more generally, a cause detrimental to the quality of the table (impact, falls, etc.).
For indoor tables
: using abrasive plastic balls, prolonged exposure to the sun, excessive humidity and rain.
The following are not covered under the warranty: Costs of carriage of faulty parts, visit by a technician, labour, indemnities in cash or in kind for immobilisation of the table
during the warranty period.
Any claim must indicate the type of table, the series number that is to be found on the underside of the tabletop and the part(s) in question, and it must be
accompanied by a proof of purchase showing the date of purchase.
Non-compliance with the above instructions for use may result in damage to the table or injury and excludes any liability of the manufacturer. Cornilleau SA
make constant improvements to the product, the manufacturer reserves the right to make technical and dimensional modifications without these instructions being binding on
us.
3
