Cornell CIC-SP583G, User Manual, Page: 7 / 12

6
Soup: Press the
“SOUP” key to start the induction cooker. The soup
light will illuminate. The induction cooker will initially cook at the third
heating level (1000W) then it will drop to the first heating level (100W).
This action will repeat continuously in every 3 sec until the system
setting time ends. You are not allowed to increase or decrease the
heating level and the power will be cut off automatically after the
cooking completes.
(Do not fill the cookware more than 2/3 of its capacity.)
Stew: Press the
“STEW” key to start the induction cooker. The stew
light will illuminate. The induction cooker will initially cook at the fifth
heating level (1900W) then it will drop to the third heating level
(1000W) and it will remain until the setting time ends. You are not
allowed to increase or decrease the heating level. The power will be
cut off automatically when the system setting time ends.
(Do not fill the cookware more than 2/3 of its capacity.)
Protection:
When circuit error occurs, the first LED (100W) indicator light will
flash.
If there is no cooking utensil on the cooking zone or if it is not suitable
for induction cooking, or the diameter is smaller than 12 cm, the first
LED (100W) indicator light will flash as well as emit a continuous
intermittent buzzer sound and switch to Standby mode after 1 minute.
Temperature protection: If the insulated gate
’s bipolar transistor’s
(IGBT) temperature is too high, the induction cooker will switch itself
OFF. The second LED (600W) indicator light will flash.
Lower / higher voltage protection: If the local voltage is lower than
165 V, the fourth LED (1400W) indicator light will flash. When it
exceeds 265 V, the third LED (1000W) indicator light will flash.
Sensor detector: If the main sensor detects any disconnection or
short circuit, the fifth LED (1900W) indicator light will flash.