3. Clean the water tank regularly by filling it with water and
shaking it. Then pour the water out.
4. CAUTION: Never use scouring pads, abrasive or harsh
cleaners as this may scratch the surface.
TROUBLESHOOTING
Problem
Possible cause(s)
Solution
The iron is
plugged but
the soleplate
is cold
Connection problem
Check the mains cord,
plug and wall socket
Temperature dial set at
MIN
Set the temperature dial
to the required position
No steam
No water in water tank
Fill the water tank
The steam control has
been set to position O
Set the temperature to
steam position
Water leaks
from the
soleplate
during ironing
The set temperature is
too low
Set
the
temperature
control
dial
to
a
temperature suitable for
steam ironing
Water leaks
from the
soleplate
while the iron
is cooling
down or after
it has been
stored
The iron has been put in
horizontal position while
there is still water in the
water tank
Empty the water tank and
set the steam control to
position O before storing
the iron
Place the iron on its heel
Not hot
The iron is unplugged
Put the plug in the socket
Power cut or fuse cut
Change fuse or stop
using
* Sent the faulty iron to a qualified service center for repair.
DO NOT repair the product by yourself.