Cornell CCM-E12BK, User Manual

Page: 5 / 8

4
read on the water level window.

Switch on the appliance. Wait until the brewing process
is finished and the funnel has run empty.

For large cups: takes 5-6g of ground coffee each cup.

Place the funnel into funnel holder and make sure the
funnel is assembled in place, and then put a paper filter
into funnel correctly.

Add proper coffee powder into paper filter. Usually a cup
of coffee need a level spoon of coffee powder, but you
may adjust according to personal taste, and then replace
the top cover.

Insert glass carafe with lid in place onto warming plate
horizontally, ensure center line of carafe aligns with that
of funnel.

Plug the unit into an outlet.

Press power switch to the “I” position, the indicator in it
will be illuminated and the appliance will begin working.
The brewing process can be interrupted by pressing the
switch to the “O” position at any time and the indicator in
it will go off, indicating your coffee maker is off. Once the
switch is pressed again to the “I” position, the appliance
will continue to brew.
NOTE: the appliance is designed with a pause-and-serve
feature, if you wish, at any time during brewing cycle, you can
temporarily remove carafe to pour and serve a cup of hot
coffee. The brewing cycle will not be interrupted and no coffee
will drip from the appliance, simply replace glass carafe onto
warming plate to restart the brewing cycle, But do not remove
glass carafe for longer than 30s, never return empty carafe
onto warming plate when it is still warm.

Remove carafe to serve when finish brewing