8
Installation method
The product can be used directly after removing the package (without
installation).
Usage of various function buttons
The buttons are touch buttons. You can tap the buttons on the
operation panel to trigger the corresponding functions.
1. When the power is turned on for the first time, the buzzer beeps
twice and enters standby mode; except the ON/OFF button, other
buttons are invalid;
2.
ON/OFF button
: in power on state, press this button to turn on/off
the device; after turning on, the system returns to standby mode,
on/off indicator light will twinkle once per second; when the device
is first turned on, the wind speed is level 2, and changes to level
after three seconds; the timer is turned off; swing is turned off;
pump absorbing is turned off; power indicator turns on; the wind
mode is normal. After turning off, the state will be saved, but the
timer setting won
’t be saved; if the mode is sleep wind before
turning off, the mode won
’t be saved, and it will change to normal
wind. In power on state, if there is no button (or remote control)
operation in one minute, the brightness of all LEDs reduces by
half; press the button again, the brightness resumes and
performs appropriate action;
3.
Speed button
: in power on state, rotate this button clockwise to
increase the wind speed from level 1 to level 3; rotate this button
counterclockwise to reduce the wind speed from level 3 to level 1.
LED indicator shows the appropriate speed state;
4.
Mode button
: the device first enters normal wind mode; press
this button to enter the natural wind mode, press it again to enter
sleep wind mode, and press it again to enter normal wind mode.
Product Installation and Usage