Vitalize430
Vitalize430
Vitalize430
Vitalize430
Vitalize430
Vitalize430
Vitalize430
Vitalize430
–
–
–
–
–
–
–
–
User Manual
User Manual
User Manual
User Manual
User Manual
User Manual
User Manual
User Manual
This unit is of leading-edge design and workmanship. If used and maintained in accordance with this user manual, it will be safe in use.
Please comply with the following safety instructions to avoid hazards and damage.
The unit must be in a satisfactory and safe condition when in operation. Take care that only authorised personnel work on the unit and that the
operators are trained. Make certain that no unauthorized persons change the settings on the unit or tamper with it.
- No safety devices (such as safety valves, overload protection units, etc.) are to be removed, modified or put out of operation
(risk of injury or death !)
- Immediately report modifications which affect safety and function to the service company nearest to you. Discontinue the use of the dispenser if
necessary. Always pull the mains power plug before any cleaning or service work on or near the unit.
- Before connecting the unit to mains power, check that the supply matches the voltage indicated on the unit backside (nameplate).
Connect the unit only to pains power outlets which are correctly earthed and fuse switched (10 amps).
In case the mains power plug does not fit your electrical outlet, the plug has to be changed by professionally qualified staff.
- Avoid to use any appliances like adapters, multi-outlets or extension cords. In case the circumstances do not allow differently, make
sure that the appliance meets safety regulations, taking care of max. power limits marked on the appliance itself.
- The powercord of the machine must not changed by the user. In case of a required replacement, contact your service agent.
- Use the machine only interior, keep it dry and away from any heat sources.
- Leave at least 10 cm space on the backside to allow air circulation. Inadequate ventilation will result in less cooling performance and worst case
in over-heating and unit damage. The max. ambient temperature at the place of use must not exceed 32°C.
- The manufacturer cannot be considered responsible for possible damages deriving by un-proper and wrong use or by modifications or repairs
made by not professionally qualified and not authorized people.
In case the machine malfunctions, do not try to repair it, but contact your local service provider. Any violation may void the manufacturer warranty
Note that only original CORNELIUS spare parts and accessories which have been checked and approved are to be used.
IMI Cornelius assumes no liability whatsoever for damage resulting from the use of non-original parts and accessories or from improper handling.
Please read carefully the Instruction Manual before installing
and using the unit in order to avoid any damage or harm.
2. Safety Regulations
Page 3