Viper Service Manual
© 2008-2016, Cornelius Inc.
- 39 -
Publication Number: 621260373SER
System Menu
The System menu is used during production to set up the unit. It also allows the technician to view and change the
number of barrels, the number of compressors and the number of pressure sensors present in the system, as
shown in Figure 34.. The description of these items is shown in Table 30.
NOTE: Changing these values to a number that doesn’t match the physical number of items in the
system generates errors or turns off some of the equipment present in the system.
When the individual fields are highlighted, the display buttons change. Refer to Table 32 for a listing of the button
functions for the various field selections.
SYSTEM
12:51P
MAR 04
# OF BARRELS 2
# OF COMPRESSOR 1
BACK
- +
SECURITY OFF
CMP #1 SENSORS BOTH
CMP #X SENSORS LOW
Introduction
Figure 34. System Screen
Security
System security is located on the System menu. It allows a supervisor or service technician to keep unauthorized
personnel from accessing the Maintenance menu. This feature is activated on the System menu. When security is
turned on, users can only access the Main and Setup menus. The word LOCKED appears in the upper left corner of
the display to inform users that security is enabled.
Pressing the extreme Left and Right buttons (Buttons 1 and 5) on the bottom of the display simultaneously and
holding them for approximately five (5) seconds unlocks the Security menu. If security is left ON on the System
menu, when the system times out or when the user goes back to the Main menu, security is re-activated and the
Maintenance menu is not accessible. To disable security, access the System menu, highlight Security and press the
OFF button.
Table 30.
Display
Description
# OF BARRELS
This selection shows the number of barrels in the system and allows the user to change the
quantity.
# OF COMPRESSORS
This selection shows the number of compressors in the system. Currently this number is fixed
at one and cannot be changed.
SECURITY
This selection allows the user to turn security on or off.
CMP #X SENSORS
This selection allows the user to choose which pressure sensors are read for the compressor.
Option
Button 2
Button 3
Button 4
Button 5
# of Barrels
-
+
# of Compressors
-
+
Security
OFF
ON
Compressor Sensors
NONE
LOW
HIGH
BOTH
