Viper Service Manual
Publication Number: 621260373SER
- 30 -
© 2008-2016, Cornelius Inc.
When all the options are set to the desired settings for the unit, press the BACK button to store these settings and
return to the Select menu, shown in Figure 18.
Setting the Temperature Format
The temperature format displayed by the unit may be set to either Centigrade or Fahrenheit. Press the °F button to
display readings in Fahrenheit and press the °C button to display readings in Centigrade.
Setting the Date Format
The date format can be displayed in either United States or European format. To display U.S. date format, press the
USA button. This displays the date in mm/dd/yy format. Press the EURO button to display the date in dd/mm/yy
format.
Setting the Time Format
Time format can be displayed in either 12 or 24 hour format. To display the clock settings in 12 hour format (1:08 P),
press the 12 HR button. To display settings in 24 hour format (23:05), press the 24 HR button.
Setting the POS Lighting
POS Lighting is controlled by the POS LIGHTING field on the Option Setup menu (Figure 23.). To turn off the
merchandiser lighting, press the OFF button while the POS LIGHTING field is highlighted. To turn on the
merchandiser lighting permanently, press the ALWAYS button. To turn the merchandiser lighting on and off with the
Sleep settings, press the SLEEP button.
Setting the Type of Syrup
Syrup type for each barrel may be selected by highlighting the desired barrel and pressing the appropriate button,
FCB, FCB-L, FUB or FUB-L. FCB is for Frozen Carbonated Beverage, FCB-L is for Frozen Carbonated Beverages -
Light (diet), FUB is for Frozen Uncarbonated Beverages and FUB-L is for Frozen Uncarbonated Beverages - Light
(diet). Each of these settings provides the proper viscosity and temperature settings for the type of syrup being
used.
Maintenance Menu
The maintenance menu, shown in Figure 24., is only available to service personnel or other authorized users, if
security is enabled.
The Maintenance menu is used for barrel maintenance, diagnostics, BRIX setup and system information. It allows
the technician access to the unit during periodic maintenance or troubleshooting problems. It sometimes overrides
the normal inputs from the system in order to perform this task.
Table 18.
Option
Button 2
Button 3
Button 4
Button 5
Temp Format
°
F
°
C
Date Format
USA
EURO
Time Format
12 HR
24 HR
POS Lighting
OFF
ALWAYS
SLEEP
#1 SYRUP TYPE
FCB
FCB-L
FUB
FUB-L
#X SYRUP TYPE
FCB
FCB-L
FUB
FUB-L
