Installation and Service Manual
Publication Number: 710160089
- 4 -
© 2004, IMI Cornelius Inc.
S
YRUP
C
OMPONENTS
Syrup containers, sold as an accessory, are stainless steel with a capacity of five gallons (18.9 liters).
They are equipped with a CO2 gas quick disconnect fitting and syrup quick disconnect fitting.
The dispenser’s syrup outlets are 1/4” (6.4mm) barb fittings, and are located at the front wall, mid-height,
of the dispenser.
Each syrup inlet in labeled with the valve number that it services.
If the “syrup in” lines need replacement or extension, a .265 I.D. (6.7 mm I.D.) polytube is recommended.
Avoid using soft or easily collapsible tubing on the “syrup in” lines.
Only stainless steel or plastic, barb or compression type fittings should be used on any syrup or soda
water connections.
Optional bag-in-box system is also suitable for use with this beverage cooler.
