JetSpray JS7 Owner’s Manual
© 2007-2015, Cornelius Inc.
- 7 -
Publication Number: 18478
Figure 5.
4.
Check that the bowl spout gasket is mounted properly to the base assembly, as shown in Figure 6.
Figure 6.
5.
Slide the bowl over the cooling coil and assemble the bowl to the dispenser. Be careful not to wrinkle the
gasket. If gasket is wrinkled, beverage will leak out of bowl. (See Figure 7.)
Figure 7.
6.
Replace the push handle and pinch tube.
A. Push the handle assembly straight up through the rectangular hole until the clips snap into place.
(See Figure 8.)
Bowl Gasket
1
2
3
4
5
6
7
8
Bowl Spout Gasket
Pinch Tube
Place Bowl
on Top of Unit
Cooling Coil
