631500193INS
Revised: July 2, 2003
E
IMI Cornelius Inc.
,
2003
IMI CORNELIUS INC
g
One Cornelius Place
g
Anoka, MN 55303-6234
Telephone (800) 238-3600 Facsimile (763) 422-3246
INSTALLATION INSTRUCTIONS
WATER BOOSTER KIT 631500193
TO THE USERS OF THIS MANUAL
This manual is a guide for installing this equipment. This unit must be installed and serviced by qualified service
person. This unit contains no user serviceable parts.
UNIT DESCRIPTION
The water booster is part of back room package and is installed either on top of the existing back room panel or
on the wall next to the back room stand. The purpose of the unit is to boost the potable water through the filter
system to maintain constant pressure throughout the beverage equipment in a restaurant. The water pump has
a liquid check valve on its outlet to prevent the back flow of water. A pressure switch is used to regulate the wa-
ter pressure throughout the system. A water booster tank is used to store water under pressure. A surge tank is
also a storage for filtered water and to absorb water pressure spikes in the system.
UNPACKING
Unpack LOOSE–SHIPPED PARTS. Make sure items are present and in good condition.
Table 1. Loose-Shipped Parts
Item
No.
Part No.
Name
Qty.
1
8871
Barbed Fitting
2
2
309852000
Clamp, Oetiker# 17.0
4
3
1992
End Cap, Square
2
4
1986
Connector Plastic
2
5
320940000
Screw #10
3
6
8865
Bracket, Front
1
7
631500193INS
Installation Sheet
1
8
560001440
Bracket, Wall Mount
2
9
8987
Wood Screw
6
IDENTIFICATION OF LOOSE SHIPPED PARTS
1. Tapered Gasket, Black (item NO TAG) used to seal connection when connecting line from surge tank to
manifold on the back room panel.
2. Barbed Fitting (item 1) used to replace the flare fittings on connections B and C of back room panel filters
so that the 3/8” line can be inserted into the barbed fittings.
