manualshive.com logo in svg

Cornelius 221000414x, Installation And Service Manual

Share
Download
Cornelius 221000414x Installation And Service Manual Download Page 64

8 Commissioning/shutdown

Installation and service manual: Postmix tower

Ribbon

62

Cornelius Deutschland GmbH

Document no. TD0000100

Version: 06/11/2017, Index 0

1.

Disconnect the USB connector (Figure 78/1) from the
touchscreen.

2.

Insert the USB cable from the laptop into the USB con-
nection of the touchscreen.

The unit will be recognized by the laptop automatically.

3.

Start up the operating system.

4.

Remove the USB cable from the USB connection of the
touchscreen and insert the USB stick with the new UI
package.

The unit’s system will boot.

8.2.2

Checking settings in the “Current Version” menu

1.

Check the version; see the document 

“Tower operator manual”, document no.

TD0000000

.

–

If it is the latest version, return to the service menu and continue with the next step

Chapter 8.2.4, page 65

.

–

If it is not the latest version, update the software; 

see chapter 8.2.3, page 62

.

8.2.3

Software updates

Prerequisites

Reference

The latest UI update has been downloaded.

The “Taptic3_Package” is in the master 
directory on the USB stick.

The touchscreen is in service position.

see chapter 4.2, page 19.

Required tools/materials

ID/
Reference

Qty/
amount

Comment

USB stick

1

4 GB to 32 GB with FAT32 
formatting

Figure 78

1

Summary of Contents for 221000414x








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands