72
5. Powerline Setup through the Ethernet Interface using Corinex
Setup Tool
If you want to change the password on the powerline interface without using web-based
utility, you can change it using the
Corinex Setup Tool
. The computer running
Corinex
Setup Tool
must be connected directly or through the hub to one of the Ethernet LAN
ports of the Router (Figure 5.1). Because the LAN side of the Router is a switch,
Powerline management messages come through to the Powerline port of the Router.
Fig.5.1 Configuration of the Powerline port through the Ethernet
Then by using the
Corinex Setup Tool
, you can discover the Powerline port of the
Router, as it will appear in the first window of the Tool. Make sure, you are configuring
the Powerline port of the Router, not any other adapter that
Corinex Setup Tool
may find
in the network.
5.1 Installing the Setup Tool
1. Insert the installation CD. The CD should automatically start the installation
process. If the installation program does not start automatically, start the
application by selecting
My Computer
, usually found on the desktop or laptop
start up screen. Navigate to the
CD
drive and double click on the drive. The
Installation CD menu
(Fig.5.2) will appear. Click on
Install Setup Tool
.
Fig.5.2 Installation CD menu
