TigoBridge B1
User Manual
Copyright © 2021 CoreTigo Ltd.
Page
6
of
21
1.3. Symbols
Symbol
Meaning
Note
: This symbol indicates a general note.
Warning
: This symbol indicates a security notice which must be observed.
Reference
: This symbol indicates a cross-reference to other documentation.
1.4. Deviating Views
The product views and illustrations in this user manual may deviate from the actual product. They are
intended only as illustrative material.
2.
Safety and Requirements
2.1. General Note
This user manual is intended for any qualified personnel using the device. All safety messages, integrated
safety messages, property damage messages, and valid legal regulations must be observed by its users.
Technical capabilities on behalf of the user are presumed.
2.2. Electrical Connection
The TigoBridge B1 shall be supplied by an isolated power source that meets the following requirements:
•
Limited-Energy Circuit in accordance with UL/CSA 61010-1
or
•
Limited Power Source (LPS) in accordance with (UL/CSA 60950-1 or EN 62368-1, Annex Q)
or
•
Class 2 supply source which complies with the National Electrical Code (NEC), NFPA 70, Clause
725.121 and Canadian Electrical Code (CEC), Part I, C22.1.
Warning
: Input current is not limited. No fire protection.
2.3. Intended Use
The TigoBridge B1 is an IO-Link Wireless Class B Bridge with an IP67 enclosure.
The TigoBridge B1 is intended for indoor use only.
The TigoBridge B1 converts IO-Link to IO-Link Wireless. The TigoBridge B1 houses internal antenna and
two M12 connectors for data and power.
TigoBridge is a device that connects a wired IO-Link device, via IO-Link Wireless, to an IO-Link Wireless
Master. A device can be an IO-Link sensor, IO-Link actuator, or IO-Link hub.
Warning
: Product applications other than those described in this user manual are not permitted.
