User and Maintenance Manual
Hydraulic brake ID 3000
Model ID 3000
Date: 2014/07/01
Revision: 1.0
www.coremo.it
Pag.
7
di
13
Ignoring the heat produced during braking affects brake lining wear and may jeopardize
the safety of the operators and the reliability of the product. Since a brake can be used
for many applications, it is advisable to contact the technical department of COREMO
OCMEA for further explanation in this regard.
6.
Transport and storage
Personnel assigned to this work must wear suitable PPE such as gloves, safety footwear
and take any other precautions necessary before proceeding with transport, handling
and storage of the this part.
1.
Transport
: When handling it is important to bear in mind the dimensions and weight of each
type of product as shown in the product drawing enclosed with this manual and in the
catalogue of the brake type in question.
2.
Storage
: When storing brakes it is important to bear in mind that a considerable weight is
concentrated in a small space. Personnel assigned to this work must wear suitable PPE
(safety footwear, gloves, etc.) in order to avoid the risk of injury.
7.
Installation
THE BRAKE MUST BE INSTALLED WITH THE MACHINE OFF.
Personnel assigned to this work must wear suitable PPE such as gloves, safety footwear and
take any other appropriate precautions to ensure adequate protection and avoid the risk of
injury.
1.
The ID 3000 brake must be installed on a bracket having the same thickness as the disc + 65
mm (Figure 1). The brake must be anchored using six M33 class 12.9 screws and tightening
torque of 4020 Nm.
