Core SWX GPM-X2 Series Instruction Manual Download Page 2

Thank you for your choice in purchasing a Core SWX style battery 
charger.  The charger is designed to improve and assist you in your  
battery charging requirements.  

Please read this manual to help you understand and capitalize on the 
features of this charger.

Features:

 

Rugged, sleekly styled, compact charger chassis.

 

Automatic Universal AC input for world-wide use.

 

Automatic detection of damaged or misused batteries for  

              added safety.

Charging Operation: 

 

Insert the AC power cord into the AC receptacle in the back of 

              the charger. 

 

Connect all batteries needing charge into the charger. 

 

Turn the rear panel  power switch to the ON position.  At this 

              time the switch will light and the LED lights on the front panel 
              of the charger will blink green when charging.

 

If the battery does not meet quick charging conditions(i.e. 

 

temperature or deeply discharged) the charger will precharge

 

the battery and go into a trickle charge mode until it is safe to 

 

enter quick charge mode.

 

The LED corresponding with the charging bay will turn solid 

 

green when the battery is fully charged.  

Notes On Use:

 

While operating the charger do not place anything on the 

 

charger or block the ventilation slots.

 

An increase in temperature is normal during charging.

 

Make sure to firmly connect batteries to the charger mounts

 

and that the contacts are clean.

 

The product must be earthed.

 

Do not attempt to disassemble the charger, please contact 

 

CoreSWX for any service issues.

 

The fuse within the AC receptacle can be replaced only with 

 

one of the same type and rating.  (A spare fuse is included for 

 

your convenience)

 

Do not operate this device near equipment susceptible to 

 

noise(i.e. TV).

When charging two packs, the charger will charge simultaneously

a
approximately 4hours.

t 1.5A per hour charge rate.  98wh packs will charge in 

 

This charge is designed for Li-Ion packs solely.

Compatibility outside of Core SWX battery packs

 

 

For V-mount, this charger will charge most V-mount, Lithium
Ion packs on the market.

 

 

For 3-Stud, this charger will only charge Core SWX packs.

Reviews: