background image

 

©CORE Lighting Limited 2012

 

 

13

 

 
 
 

6.

 

MECHANICAL 

6.1.

 

Dimensions 

 
Overall Width 250mm 
Overall Depth 255mm 
Overall Height 230mm 

6.2.

 

Antenna 

 
The antenna is a high-gain type similar in performance to the Wireless Solutions W-DMX 2dB 
standard antenna according to testing. This antenna is now fitted to all CORE POINT units. 

6.3.

 

Locking 

 
The unit may be locked to a nearby object by passing a locking wire or padlock through the handle 
bars on the top of the unit. 
 

7.

 

Warranty 

 
CORE Lighting Limited (CORE Lighting) warrants this product to be free from defects in materials and 
workmanship (subject to the terms set forth below). 
 
CORE Lighting will repair or replace (at CORE Lighting's option) this product or any defective parts in 
this product. The standard warranty period is 24 months from date of purchase although this period 
may vary from country to country. If in doubt consult your dealer and ensure that you retain proof of 
purchase. 
 
To obtain warranty service, please contact the CORE Lighting authorised dealer from which you 
purchased this product. If your dealer is not equipped to perform the repair of your CORE Lighting 
product, it can be returned directly to CORE Lighting, with carriage being paid at your own expense. 
You will need to ship this product in either its original packaging or packaging affording an equal 
degree of protection. Providing the product is found to be faulty, CORE Lighting will pay for return 
carriage. 
 
Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this 
product is within the warranty period, must be presented to obtain warranty service. 
 
This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from 
this product or (b) this product was not purchased from a CORE Lighting authorised dealer.  
 
This Warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, 
abuse, negligence, commercial use, or modification of, or to any part of, the product. This Warranty 
does not cover damage due to improper operation, maintenance or installation, or attempted repair 
by anyone other than CORE Lighting or a CORE Lighting dealer, or authorised service agent which is 

Summary of Contents for Point 30






















Reviews: