Page 7
PROCEDURE
1.
Install the rear stabilizer assembly
into the bench frame, then use an
allen key to secure the stabilizer
using a M10 flat washer and a
M10 x 25mm button head cap
screw.
2.
Use an allen key and an open-
ended wrench to finish securing
the stabilizer to the frame using
the end plate, two of the M10
nylock nuts and M10 x 130mm
button head bolts, and four of the
M10 flat washers.
110-4017
731-0367
110-3955
731-0367
730-2882
Fig. 3
3.
Elevate the seat frame to
install the seat. Use an allen
key to secure the seat pad
to the frame using two of the
M10 x 30mm button head cap
screws and M10 flat washers
4.
Use an allen key to secure
the back pad to the frame
using two of the M10 x 60mm
button head cap screws and
M10 flat washers.
5.
Assembly is complete.
110-4316
731-0367
731-3195
731-0367
Fig. 4
