Page 8
Required Tools:
• Ratchet Wrench
• 16mm Socket
• 16mm Open-Ended Wrench
• 5mm Allen Key
Anchor Guidance:
• All equipment must be bolted down prior to use by a licensed contractor.
•
WARNING:
Equipment that Is not securely bolted to the floor is not safe.
• The customer is responsible for determining the suitability of the installations site.
• Factors such as equipment weight, vibration, overhead clearance, workout activities should be
considered.
• When the floor is constructed of concrete, the concrete should have a rated strength of at least
4000psi.
• The anchors should be installed in accordance with the manufacturers recommendations.
• It is the responsibility of the gym owner to ensure that the sub-floor and installation anchors are
appropriate for the equipment.
ASSEMBLY
PROCEDURE
1.
Install the left side leg to the frame then use
a ratchet wrench with a 16mm socket and a
16mm open-ended wrench to secure the leg
to the frame using two (2) pieces each of the
M10 x 75mm bolt and M10 nylock nut, and
four (4) pieces of the M10 flat washer.
Fig. 3