Page 3
DANGER - to reduce the risk of electrical
shock:
1. Always unplug the machine from the electrical outlet
before cleaning or servicing.
2. This machine is not intended to be serviced by the end
user, refer servicing to qualified personnel only.
3. This product will be wired for either 120 VAC
nominal power input OR 230 VAC nominal input. It
is factory-equipped with a specific electric cord and
plug to permit connection to the proper electric
circuit. Make sure that the product is connected to a
dedicated power line having an outlet with the same
configuration as that of the plug.
4. Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check
with a qualified electrician or serviceman if you are in
doubt as to whether the product is properly grounded.
Do not modify the plug provided with the product.
NO adapter should be used with this product. If the
product must be reconnected for use on a different
type of electric circuit, the reconnection should be
made by qualified service personnel in order to avoid
a hazard.
5. Keep power cord away from heated surfaces. Unplug
power cord when the machine is unattended and
before performing any preventative maintenance such
as cleaning or replacing a worn part.
6. If the power supply cord is damaged, it must be
replaced by the manufacturer, its service agent, or
similarly qualified persons in order to avoid hazard.
WARNING - to reduce the risk of injury to
person:
24 in (0.6 m)
F
ig
. 1
- Required Clearance (RB Shown)
1. Assemble and operate the machine on a solid level
surface. Position the machine with a minimum of 24
inches (0.6 meters) of clearance to allow for ease of
mounting and dismounting.
The actual area for access and passage shall be the
responsibility of the facility and should take into
account this training envelope, Americans with
Disabilities Act Accessibility Guidelines (ADAAG)
requirements and any required local codes or
regulations (www.access-board.gov/ada).The
safety and integrity of this equipment can only
be maintained when the equipment is regularly
examined for damage and wear and repaired. It is the
sole responsibility of the owner of this equipment to
Before using this product, it is essential to read the ENTIRE Owner’s Manual and ALL installation
instructions. The Owner’s Manual describes equipment setup and instructs members on how to use
correctly and safely.
Read all warnings posted on the equipment.
Health related injuries may result from incorrect or excessive use of exercise equipment. Core Health
& Fitness strongly recommends you to encourage your members to discuss their health program or
fitness regimen with a health care professional, especially if you or they have not exercised for several
years, are over 35, or have known health conditions.
WARNING!
IMPORTANT SAFETY INSTRUCTIONS
