access control
systems
QUICKGUIDE TO ACCESS CONTROL INSTALLATION
Model 2003
One Door Control
n
n
n
n
n
n
n
n
n
n
One door access control
Supports one card reader and one keypad
Battery Backup: 4 Amp/hr for 15 hours of backup time
Power Requirements: 16.5VAC @ 40VA transformer with standby battery
Supports Bar Code, Data Chip, Mag-Stripe, Proximity and Wiegand card technologies
Memory Backup: 3 VDC lithium battery for a minimum of 30 days memory backup
One Door Relay: Form C and Form A contact rated 5A @ 30 VDC
One Auxiliary Relay: Form C contact rated 5A @ 30 VDC
One Voltage Output: Switches low (-) 50 ma
One Sh
unt Contact and One Zone Input
n
26/30-bit Wiegand card formats
Model 2016
Two Door Control
n
n
n
n
n
n
n
n
n
n
Two door access control
Supports two card readers and two keypads
Battery Backup: 4 Amp/hr for 15 hours of backup time
Power Requirements: 16.5VAC @ 40VA transformer with standby battery
Supports Bar Code, Data Chip, Mag-Stripe, Proximity and Wiegand card technologies
Memory Backup: 3 VDC lithium battery for a minimum of 30 days memory backup
Two Door Relays: Form C and Form A contact rated 5A @ 30 VDC
Two Auxiliary Relays: Form C contact rated 5A @ 30 VDC
Two Voltage Outputs: Switches low (-) 50 ma
Two Shunt Contacts and Two Zone Inputs
n
26/30-bit Wiegand card formats
System 2
n
n
n
n
n
n
n
n
Networks up to 16 doors
Each unit Supports 485 users
Add up to 6,000 users later
Start with one Door now, add more later
Built-in programming or use your PC
Easy off-site set-up & reporting
Reliable distributed system
Built-in printer output
For further assistance, call (800) OK CORBY
