Questions? Give us a holler...
800-223-4332
tech
@
corbin.com
FIG 7
FIG 6
FIG 8
FIG 9
INSTALLATION OF THE TRUNK BOX
1. Remove the two stock bolts and spacer on the
chrome fender rail using a 12mm open wrench.
(Figure 1)
3. Replace the fender rail bolts with the supplied
stainless steel studs and #P10162 spacer on
each stud, using a 5/8” wrench
(Figure 3)
.
Tighten to 12 ft. lbs.
4. Mount one side bracket to the top bracket
using the supplied 8mm x 25 Allen bolts and flat
washers
(Figure 7).
Tighten to 10 ft. lbs.
5. Position the trunk mounting bracket onto the
fender rail, then position the other side bracket
onto the opposite fender rail and secure to the top
mounting bracket using the supplied 8mm x 25
Allen bolts and flat washers
(Figure 8).
Tighten to 10 ft. lbs.
6. Line up the six holes on the trunk to the holes
on the mounting bracket. Secure with the
supplied 1/4 x 20 x 1” button head Allen bolts,
lock washer and flat washer. Tighten to 6 ft. lbs.
(Figure 9)