16
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
ED5600N Series Exit Devices For
9M100 IN120 Series Trim
6. Install Head Cover:
a. Lay device wire harnesses across ¾” hole (Fig. 14a).
b. Tuck wires into hole when installing cover so that wires are not pinched between
head cover and door.
c. Attach head cover using (2) #8-32 flat head screws (Fig. 14b).
Use 3/4” hole to
tuck trim and
device wire
harness under
head cover
6) Mortise Exit Installation Instructions (Continued)
Fig. 14a
Fig. 14b
Mortise Exit Installation Continues on Next Page - Section 7
