15.
Plug your appliance into a stand-alone electrical outlet with a voltage matching what is
indicated on the rating plate. Do not plug other appliances on the same outlet.
16. Make sure the plug is not squashed or damaged. Failure to do so could result in a short circuit,
electrical shock or fire.
2. INSTALLATION
(continued)
LOCATION
When choosing the location for your appliance, make sure the floor is level and strong enough to hold the
weight of the appliance and its contents (once filled) and that the room is well ventilated. Avoid placing your
appliance near a heat source, such as a stove, boiler or radiator. Also avoid direct contact with sunlight as this
can increase power consumption.
Extremely cold ambient temperatures may also prevent the unit from operating properly. This appliance is not
intended for use in a garage or outdoors. Do not cover the unit with a blanket, plastic or any other material.
When installing, make sure that 25.4 mm (1") of clearance is left on both sides, 25.4mm at the rear
(1") and 300 mm (2") above the unit. This will allow cool air to circulate around the appliance and
improve the efficiency of the cooling system
.
25
1” (25.4mm)
2” (50.8mm)
