3.
INSTALLATION
INSTRUCTIONS
(
CONTINUED
)
D. HANDLE INSTALLATION
Remove door handle and screws from the plastic bag and install it onto the door. Then take out the two
handle stoppers and cover the installed screws with them. The handle can be installed on either side for
a left or right door opening.
E. LEVELLING
If the unit is not leveled, the doors may not close or seal properly, causing cooling, frost, or moisture
problems. It is very important for the unit to be level in order to function properly. To level your unit, you
may either turn the level leg clockwise to rise the unit – clockwise to lower.
4.
OPERATING
YOUR
APPLIANCE
USING YOUR FREEZER
When using the freezer for the first time or after defrosting, turn the temperature control to set MAX for at
least two hours before introducing the food to be stored. Let the freezer cool overnight before adding
large amounts of
unfrozen food
. Never add more than 2-3 pounds of unfrozen food per cubic foot of
freezer space.
All frozen food products you purchase should be placed in the freezer as soon as possible to avoid the
frozen food from defrosting.
To obtain the best possible results from your appliance, it is important that you know how the mechanism
works.
TEMPERATURE SETTING
y
Plug on your appliance. The internal temperature is controlled by
a thermostat. There are 3 settings: MIN, NORMAL and MAX.
MIN is warmest setting and MAX is coldest setting.
y
The appliance may not operate at the correct temperature if it
is in a particularly hot or if you open the door often.
NOTES:
T
urning the temperature control to the "OFF" position stops the cooling cycle but does not shut off the
power to the freezer.
If the unit is unplugged, has lost power or is turned off, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the freezer will not start.
Large amounts of food will also lower the cooling efficiency of the appliance.
21
