11
12
E
N
GL
IS
H
For how-to videos, visit
Coravin.com/start
2
1
CHANGING AND CLEARING
THE NEEDLE
1
Start with SmartClamps™ in down
position. Grasp Needle Grip, located at
top of Needle, and unscrew to release
from System. Needle drops down
quickly.
2
Tilt Needle slightly and pull it up and
away from System to remove.
3
If installing a new Needle, carefully
remove Needle Guard. Place Guard onto
old Needle and dispose according to
local regulations.
4
If existing Needle is clogged, use Needle
Clearing Tool to poke cork/sediment
through eye of Needle.
5
Hold new Needle by Needle Grip and
slide pointed end back into Needle
Guide, slightly tilting Needle.
6
Screw Needle Grip back into System
until
fully tightened.
CAUTION: Needles are sharp.
Handle with care.
1
2
4
CLEANING
THE SYSTEM
Clean Coravin System after each use.
1
Rinse Spout, SmartClamps™ and Needle
Guide with warm, clean water. Ensure
SmartClamps™ move up and down with
ease.
IMPORTANT:
Never press Trigger while
rinsing Spout. This may damage System.
2
Remove from water and dry thoroughly
with a soft cloth.
3
Quickly
PRESS AND RELEASE
Trigger to
clear any excess water.
Do not submerge System in water or any other liquids. It is not dishwasher safe. Do
not use abrasive cleaners or scouring pads that can scratch exterior surface.
If after cleaning System, it feels sticky or clogged, repeat cleaning procedure using
a 50/50 mixture of water and white vinegar. This is especially helpful after accessing
dessert wines.
Do not let wine dry on System. Clean immediately after use.
TIPS
1
