6
c
b
a
IMPORTANT:
It is advised that
this stage is carried out by two people to avoid damaging the runners, rails or doors.
From inside the enclosure, push fit the 'runners' fitted to the top and bottom of the doors, onto the 'door rollers' pre-fitted in the
top and bottom rails.
10
From inside
Top of doors
Bottom of doors
The 'cam adjusters' at the top and bottom of the doors may need adjusting so that the doors slide freely and the magnetic seals
meet evenly when the doors are closed.
a:
Loosen all 4 cam adjuster screws on each door (1 turn maximum).
b:
Turn the cam adjusters (by hand or using a 16mm
spanner) until the doors hang vertically. Re-tighten the screws -
do not over tighten
.
c:
Push fit all 8 covers onto the doors.
11
From inside
PN50103
