W A R N I N G
Please read instructions in their entirety
before using the UV Sterilizer.
Cut off the power and stop using
if the UV Sterilizer was submersed
or dampened by water.
Cut off the power immediately
if water enters into the quartz
housing.
Cut off the power if there is a
burning or smoking smell.
Never connect the sterilizer to the
power outlet while hands are wet.
Never look directly at the
unshielded lamp or allow
prolonged exposure to skin as
the ultraviolet radiation emitted
from the lamp can be harmful.
Do not pull cord to disconnect
power supply.
Always leave a drip loop in the
power cord to prevent water from
running down the length
of the cord and
reaching the
power outlet.
Though the Turbo-Twist is water
resistant, it should never be
intentionally submersed in water.
Always install the sterilizer in a
location where there is little likelihood
of flooding or water dripping onto the
UV Sterilizer.
The water temperature flowing
through the UV Sterilizer should
be below 105
o
F (40
o
C).
Make sure that appropriately-sized
hose lock nuts are positioned on
hose barbs before attempting to
connect tubing.
Always disconnect the UV Sterilizer
from the power supply before
shutting down the flow of water
to prevent overheating.
Only a 120V (60 Hz) electrical
source should be used with the
Turbo-Twist.
8
