cor thermostat TSTATECM2W01, Installation Instructions Manual

Page: 6 / 40

5
INSTALLATION
UNIT DAMAGE HAZARD
Failure to follow the recommended wiring practices could result in
damage to the wall control and personal property.
Improper wiring or installation may damage Thermostat Control.
Check to make sure wiring is correct before proceeding with
installation or turning on power.
CAUTION
!
Installation Notes:
S
Never remove the Two − Wire Relay Module board from the plastic hous-
ing. Doing so could warp and damage the components on the board.
S The Two − Wire Relay Module should be mounted before wires are at-
tached.
S Provide sufficient excess wiring behind the mounting plate. Coil the
wiring, creating a service loop, and place in mounting box or in the
cabinet to remove strain against the terminal strip.