14
6.1. High pressure hand pump
To refill the Karbones with the Hand pump, please follow the following instructions :
•
Pull the pump’s female clip before introducing the male clip of the head regulator
(«click» = good connection)
•
Pump until the pressure desired (max. 250 bar / 3750 psi)
•
Open the pump valve
Conseils & Entretient
•
We advise to not use the pump more than
5 minutes continuously
, a little cooling time
is necessary
•
Between every pumping cycle, you can purge the pump to let the base cool (let the
tank connected)
•
The optimum pumping cycle is : 2 mins 30 secs of pumping - little pause - pump again…
•
Only the high pressure manual pump sold by Karbones is compatible with Karbones
•
Do not let the pump connected under pressure when it is not used
•
Regularly compare the manometer (gauge) of the hand pump with the one of the Ka-
rbones
•
Please make sure that no dust, water traces or other foreign elements is present in the
clips, once the protections are removed
•
A bad orientation of the male clip in the female clip can be the origin of a micro-leak
(not causing any danger whatever the pressure is). In this case, reposition the clip in a
way that the weight of the tank does not make any constraint on the clip
•
After 5 complete fillings of your tank, you have to change the filter inside the cartridge.
You have 5 white foam filters already supplied with the pump.
Pressure gauge
Filter cartridge / Female connector
High pressure hose
