1
2
3
4
5
CA180 / CA180F
RC Helicopter
07
Main Blades Adjustment
1. The main blades may
rotate inconsistently out of
the box.
2. The adjustment can be
done by pulling each
blade.
3. Please make sure each
blade is spinning on the
same horizontal.
Test Before the Flight
The tests over all the electric parts before the flight are highly recommended. Please
do not lift the helicopter from the ground until all trimming and setting are done.
Please make sure the throttle stick and trim are at the lowest position.
1. Set throttle to the lowest point.
2. Extend antenna.
3. Turn on the power switch.
4. Connect battery to receiver.
5. Wait for the LED to turn solid green.
If the light on the receiver does not turn to solid green, check the throttle trim on the
radio. Try sliding the trim down until the light becomes green. Please do not fly
before the receiver lighting solidly.
Warning: Please be reminded that transmitter MUST be on before the battery
gets connected/disconnected.
