950-779-115-02, Revision 02
Installation and Turn-up
PRL-770 and PRL-779 List 1E and 2E
March 17, 2000
5
P
REPARING
THE
RT
HDSL and subscriber wiring are threaded through the Insulation Displacement Contact (IDC) connector located
on the right-hand side of the RT. Use either the wall mounting or the line-up template provided in the Mounting
Kit for the RT wall positioning.
The RT is now prepared for mounting.
M
OUNTING
THE
RT
The PRL-770 and PRL-779 are suitable for mounting on a wall or line-up. Wall mounting is preferable.
Wall Mounting
Use the back panel of the enclosure, or the enclosed hole pattern drawing as a template for marking the locations
of mounting holes as shown in
Figure 2.
Wall Mounting Dimensions
Before setting up the equipment, select a location that will allow sufficient access to wiring
connections from the telco access door.
