ID Platform FAP20
Quick Start and Regulatory Guide
Using
your device
TURNING ON | TURNING OFF your device
Power On |
Press and hold during 3 sec. the power button.
Power Off |
Press and hold during 3 sec. the power button and select “Power off” in the dialog box.
Reboot |
Press and hold during 3 sec. the power button and select “Reboot” in the dialog window to restart the device.
Suspend Mode |
Press and release the power button to place the device in suspend mode. The display will be off
and go into a low power state to save battery power.
Reset |
Press and hold the power button during 13 sec.
power key
Page 12 | 14
QSG
200053 A10
USB Communication Management
The ID Platform is equipped with
1x USB
communication port internally switched to manage different peripherals:
-
USB Expansion (for FAP20 peripheral)
-
USB type A host connector
-
USB type C for service port
The USB for internal peripherals and external USB-A are the USB lines with the high priority level.
USB-C service port is not available when an internal peripheral or USB-A is turned on.
To manage the USB communication, please use the ConfigureDev application and enable/disable the required options:
USB FAP20
USB type A
USB type C
