www.coppernic.fr
C-eight
QUICK START GUIDE & REGULATORY
QSG 180090 – A00
Safety Information
–
Europe
This device was tested for typical body-worn operation. Use only COPPERNIC tested and
approved accessories to ensure EU compliance.
Laser Devices
Class 2 laser scanners use a lower power, visible light diode. As with any very bright light
source, such as the sun, the user should avoid staring directly into the light beam.
Momentary exposure to a class 2 laser is not known to be harmful.
Caution: Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure.
Warnings of using Scanner imager
CAUTION: CLASS 2 LASER WHEN OPEN. DO NOT STARE INTO BEAM OR
VIEW WITH OPTICAL INSTRUMENTS. COMPLIES WITH 21CFR1040.10
AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE
NO. 50, DATED JUNE 24, 2007 AND IEC/EN 60825-1:2014.
Power Adaptor
1.
Use only a C-eight approved Power Adaptor with electrical ratings: Output 5VDC, min
2A, with a maximum ambient temperature of at least 45
°
C.
2.
Use of alternative power adaptor will invalidate any approvals given to this device and
maybe dangerous.
Battery Information
Use only a COPPERNIC approved batteries.
When batteries are stores over six (6) months, some irreversible deterioration in overall
battery quality may occur. Store batteries at half of full charge in a dry, cool place, removed
from the equipment to prevent loss of capacity, rusting of metallic parts and electrolyte
leakage. When storing batteries for one year or longer, the charge level should be verified at
least once a year and charged to half of full charge.