Version A - Released June 17, 2020 - Copernicus Educational Products Inc.
14
Setup and Test Electric Lift
4
Lay the HAWM down on a table or
floor near a wall outlet (within 6’)
1
Plug in the electric lift power adapter
3
Plug in and turn on the power strip
5
Connect Electric Lift Remote
4
6-Outlet Power Strip
x1
You will need: (Not to Scale)
Peel clear film off of hook and loop strip
and press power strip against
adhesive to secure in place
2
If there is any binding, shaking or excessive vibration when testing the lift,
please contact our customer support team for assistance (see pg.5)
SLIDE UP AND DOWN FULLY 2x THEN
MOVE BACK TO MIDDLE OF TUBES
BEFORE PROCEEDING. ENSURE CABLES
ARE CLEAR!
Test Electric Lift before wall mounting
6
TO WALL OUTLET
A
B
UP
DOWN
