Tools required
None
4
For Beds with LED underbed lights
Connect the wire from the
siderail LED
light
with the
Switch Distribution Block
by
routing through the
wire clips
and the
hole
in
the
headboard
back
panel
(
Figure 1
). Plug the wire in the
Switch
Distribution Block
. Use the same method
to connect the other side
LED light
with
the
Switch Distribution Block
. Then plug
in the power on the LED Driver. The LED
lights are ready to use. Hold
Touch
Dimmer Switch
to dim the light or turn it
on and off.
Step 1:
Connect the LED lights with
Switch Distribution Blocks
Figure 1
. Connect Siderail LED Light
Plug the connector on
the wire with the LED
light on the siderail
Siderail LED light
Headboard
back panel
Headboard
leg
Wire clips
with Switch Distribution Block
Touch Dimmer Switch