Copa FLOOR STANDING 26, User Manual

Page: 30 / 40

Remote Controller 1
29
USER'S MANUAL
This remote controller is the general one of our company,it can be used for many types of our air-conditioners. We beg your
forgiveness that we would not introduce the button or indicator which is not applicable for the units you purchased.
NOTE:
• The Cleaning funcation only can that AC be in bide one's time, and not any mode operation state under to do,
and after continue operation six minitues cleaning, the AC unit will quit cleaning automatic. user doesn't using this
cleaning funcation every day, suggest one times only for half a mouth or one mouth.
• The set running status can be saved after closedown of the air conditioner. If the set status remains unchanged,
for startup for the next time, simply press the On/off button, and the air conditioner can continue running in the last
running mode.
• Above figure shows all indications for the purpose of explanation, but practically only the pertinent parts are
indicated.When air-conditioner is cooling-only model, the HEAT is for FAN.
• TURBO operation(super strong-wind function) is the AC addtion function. When TURBO operation is selected,
room temperature is not controlled with operation being continua lly.If you feel the room temperature is too cool or
too heat,please cancel the TURBO operation.
Use of remote controller
Auto operation indicator
Cool operation indicator
Dry operation indicator
Heat operation indicator
Fan operation indicator
Air flow indicator
Sleep indicator
Turbo operation indicator
Clean air indicator
Fan speed indicator
Timer time indicator
ON/OFF button
This button, when pressed starts operation and
stops when repressed.
OPERATION MODE select button
This button changes the operation mode:
AUTO,COOL,DRY,HEAT(FAN).
(For the cooling-only models, the "Heating" mode is for fan).
Press this button to select the auto speed, high
speed, mid-speed or low speed of air delivery.
TURBO button
This button changes to TURBO operation, the fan
speed for super-wind,press it once again will deleted.
(It does not work in AUTO,DRY,and FAN mode.)
CLEAN button
Press this button to clean indoor air,press it
once again will deleted.
SLEEP button
PressThis button changes to SLEEP operation,
and press it once again will deleted.
TIMER button
This button is used to set the switch-on or
switch-off and the timer time.
AIR FLOW button
SWING button
Press this button changes the up/down flap
mode:natural flow ,swing or fixed wind.
This button used for selection of the left/right
air flow direction,whenever pressed the in flap
will swing or fix
SET TEMPERATURE button
Press this button sets the room temperature.
press the TEMP+ key once to increase the
set temperture by 1
O
C,press TEMP - key,
reduce the tempeture by 1
O
C.(The room set
temperature range is from 16-32
O
C).
FAN SPEED button
Fresh indicator (optional)
FRESH button (optional)
This button is used to open or close the
fresh air ventilator.
Setting temperature indicator