1
Ethernet Over UTP Master/Slave Transceiver
MODEL: EA-EOU101K
◆
Description:
EA-EOU101 is designed to extend IP Ethernet transmission and use UTP cable to IP cameras
or devices. EA-EOU101 transmission distance up to 1000m (3300ft), these transceivers are
extremely simple to use. Status LEDs indicate power and link connectivity/activity for RJ45 ports.
◆
Feature:
No PC required, plug & play and reducing the cables cost
Transmit IP camera or other 10/100 Base-T full duplex IP devices over CAT-5e cable
Up to 1000 meter transmission distance by CAT-5e cable
Built-in 6KV surge protection at BNC and 4KV at RJ45 ports
Multi EoU transceiver/IP cameras to one transceiver at NVR side transmission
◆
SPECIFICATIONS
:
MODEL
EA-EOU101
Extender Interface
Connector Type
1 x BNC with BNC to Terminal Block Adaptor [15-BT104]
Cable Type
The Straight through cable Cat.5e/Cat.6
Max. Transmission Distance
1000m (3300ft.) for the Cat.5e cable
Ethernet Interface
Connector Type
1x RJ-45 with LEDs on Connector
Cable Type
Straight through or cross-over Cat5 Cable, Auto MDI/MDIX
Rate
IEEE 802.3x, Auto-Detection for 10/100Base-T and full/half
duplex
Control & Indicators
Color LED
UTP Data Signal Strength
Green
：
GOOD (Link speed > 60 Mbps)
Amber
：
MEDIUM (Link speed 20~60Mbps)
Red
：
BAD (Link speed < 20Mbps)
OFF
：
NO LINK
Yellow LED (On RJ45)
Power On
Green LED (On RJ45)
Link/Act.
Push Button
Reset / Pairing
(1)
(Join or Leave Network Group
(2)
)
Push
Duration
LED
Status
Description
1 – 3 sec
Red Blinking
Join/Host New
Network Group
(3)
5 – 8 sec
Amber Blink
Once -> OFF
Leave Current Network
Group
(4)
12 - 30 sec
OFF -> Amber
Blink Once
Reset to Default Network
Group
Power
Input Operating Voltage
DC 12V / 500mA
Power Consumption
1.5W
