8
Time setting:
Press
or
to move cursor , press
VOL+
or
VOL-
to change number, when
finished, press
to confirm.
The Time display will not show on LCD view playback, but will be
present on PC playback.
Download the files contained in the DVR into the PC to playback
the Video with Time display.
Power Mode:
This function allows to set a time to turn the PDR to stand by mode.
Press
NEVER / 60s / 30s / 180s
TROUBLE SHOOTING
T
roubleshooting:
1. No power
᧶
If there is no power, Charge the PDR first. Leave charging 6 hrs for its first charge.
If still no power, try another source of power through USB connection for charge.
2. Auto power off after power on:
When the unit gets low battery, it automatically turns off.
The auto power off function is set through the menu, to change the settings, go to the
TIME SETTING
under the
system setup
.
3. Have not response when press button:
Depending on the capacity of the SD card, the PDR may get slow. It can take more than
10 seconds to respond, specially when trying to see the files.
4. Saved files cannot be found:
When the SD card is inserted ,normally is set as a default drive to store files.so if you had
some files recorded on the units flash memory, remove the SD card and search.
It could be either a lost file due to improper recording or interruption.
5. PDR is not responding:
or
to move cursor to right and left , a n d press
to move up and down.
The LEDs will flash during the Standby mode. Press the PLAY/PAUSE button
to Resume the operation in the DVR.
VOL+
or
VOL-
When PDR is not responding, Press “RESET” Button.