HD-TVI DVR User Manual
16
ĺ
Click “Apply” button to save the setting.
4.3.3 Time
ķ
Go to Menu
Æ
Setup
Æ
Record
Æ
Time interface to set recording time. Refer to Fig 4-12:
ĸ
Set Pre-alarm record time and post-
alarm record time. Select “All” to set the same
settings for all channels.
Fig 4-12 Record Configuration-Time
Pre-alarm Record Time:
Set the time in seconds to pre-record before the actual
recording begins.
Post-alarm Record Time:
Set the time in seconds to post-record after the actual
recording has finished five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s.
Expire Time:
Set the expiration time for recorded video. If the set date is overdue, the
recorded files will be deleted automatically.
Ĺ
C
lick “
A
pply” to
save the setting.
4.3.4 Stamp
This provides an option to enable or disable the Camera Name and the Time stamp on the
video. The user can also choose a position for the stamp on the screen
.
To set up stamp as follows:
ķ
Go to Menu
Æ
Setup
Æ
Record
Æ
Stamp interface. Refer to Fig 4-13:
Parameter
Meaning
Rate
720P: 1-30
ͧ
NTSC
ͨ
1-25(PAL); 1080P: 1-15
ͧ
NTSC
ͨ
1-12(PAL)
Resolution
This series supports 720P, 1080P
Quality
The higher the value is, the clearer the recorded image is. Six options:
lowest, lower, low, medium, higher and highest.
Encode
VBR and CBR
Max bit stream
You shall adjust it subject to the actual network condition